Installing HP LaserJet 1020 on Redhat,Fedora 9/10.
Hi Friends,
If you have Printer HP LaserJet 1020 and if you are getting trouble to install on Redhat, Fedora 9/10 then follow this method your Printer will work perfectly :-
Click on Below link to Continue Reading at Ask4 IT Solutions ( IT Solutions Provider India)
Click on this link to continue reading :-
http://blog.ask4itsolutions.com/2009/01/08/installing-hp-laserjet-1020-on-redhatfedora-910/
thanks
Wagner
January 22, 2009 at 8:26 pm
Thanks a lot that you posted this steps
i installed it on RHEL and its work fine with this instructions
thanks
John
February 1, 2009 at 8:03 pm
Hello,
everything dynamic and very positively
Thanks
Robor
Robor
February 5, 2009 at 1:49 pm
hai,
i followed all the steps to install hp laser jet 1018 on fedora 8. i have added printer. When i give print option it is enabled . but it is not printing even the test page. may i know the problem
thanks in advance
sumathi
March 2, 2009 at 7:23 pm
1. yum -y install gcc*
2.wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz
3tar zxvf foo2zjs.tar.gz
cd foo2zjs
Step 4
[root@barot.wordpress.com~]# make
[root@barot.wordpress.com~]# make install
[root@barot.wordpress.com~]# make install-hotplug (this command will detect your USB printer)
system-config-printer
added printer
$ ./getweb 1018 # Get HP LaserJet 1018 firmware file
Followed all these steps . but i am unable to take print
sumathi
March 2, 2009 at 7:33 pm
This post is for HP LaserJet 1020..
But Anyways tell me What error you are getting can you tell me i will try to help you out
Tejas Barot
March 2, 2009 at 8:32 pm
wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz
3tar zxvf foo2zjs.tar.gz
cd foo2zjs
[root@server~]# make
[root@server~]# make install
[root@server~]# make install-hotplug
system-config-printer
added printer
$ ./getweb 1020 # Get HP LaserJet 1018 firmware file
But I cant print the file .
Shine Joy
March 9, 2009 at 1:12 pm
Can you tell me what error you are gettting ?
Tejas Barot
March 9, 2009 at 1:43 pm
[...] [...]
سؤال ارجو المساااااااعده بحل الاسئله - مجتمع لينوكس العربي
April 20, 2009 at 7:56 pm
[...] [...]
أ“أ„أ‡أ، أ‡أ‘أŒأ¦ أ‡أ،أ£أ“أ‡أ‡أ‡أ‡أ‡أ‡أ‡أڑأڈأ¥ أˆأچأ، أ‡أ،أ‡أ“أ†أ،أ¥ - أ£أŒأٹأ£أڑ أ،أأ¤أ¦أںأ“ أ‡أ،أڑأ‘أˆأ
April 20, 2009 at 7:56 pm
how can i install firmware
i need u r help
plz send it
VEN
April 30, 2009 at 2:30 pm
If you want to install firmware then just go to Extracted directory. and just execute command i.e. ./getweb 1020.It will start installing
Tejas Barot
April 30, 2009 at 3:56 pm
printer installation justhangs. i get:
jon@jon-server:~/Desktop/foo2zjs$ system-config-printer
/usr/share/system-config-printer/system-config-printer.py:197: GtkWarning: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
self.xml = gtk.glade.XML(xml, domain = domain)
^CTraceback (most recent call last):
File “/usr/share/system-config-printer/system-config-printer.py”, line 5422, in
main(configure_printer, change_ppd, devid)
File “/usr/share/system-config-printer/system-config-printer.py”, line 5389, in main
gtk.main()
KeyboardInterrupt
————————————-
Now what???? Thanks fot your help
jon
May 17, 2009 at 5:37 pm
Ok If you have set any external repository then try to install gtk.It’s Basically problem of GTK AFAIK. So Execute this command yum -y install gtk*.If you are getting errors still after that than let me know. I Will try to sort it out.
Tejas Barot
May 18, 2009 at 12:03 pm
Hi thanks a lot… it work flawlessly on Fedora 11 as well
Just tried it today.
Cheers
Nikhil Pawar
June 22, 2009 at 6:51 pm
Congratulations.
and
Thanks to inform me that it works on Fedora 11 too.
Tejas Barot
June 22, 2009 at 7:20 pm
Hey Thanks:)
It works!
Subir Bhaduri
June 22, 2009 at 10:13 pm
Dear members, I have facing some problem to configure my HP 1020 Laser printer in Fedora 11, i have followed the following steps
Step 1:- Execute Following Command
wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz
This command will download Driver
Step 2 :- Unpack the downloaded Drivers.Execute Following Commands
tar zxvf foo2zjs.tar.gz
cd foo2zjs
Step 3:- Now Compile Drivers & Install Drivers (GCC Packages need here
now)
[r...@barot.wordpress.com~]# make
[r...@barot.wordpress.com~]# make install
[r...@barot.wordpress.com~]# make install-hotplug (this command will
detect your USB printer)
after finished the above three steps I Execute system-config-printer
command
but get the message
GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply.Possible causes include: the remote application did not send a reply,the message bus security policy blocked the reply, the reply timeoutexpired, or the network connection was broken.
there i find the driver for my HP Printer and Installed it.But when i starts to print my
documents , the printer is not working.it gives nothing.
I checked the Document print status where i found that the JOB is completed!!!But i am not getting the printed stuffs!
So any solution for the above.
anupam
June 25, 2009 at 1:19 pm
Hi ,
Thanks for giving this information.It works on RHEL5.5 but when i install on RHEL6.0 Beta version it give the following error in /var/log/messages
Jul 8 10:32:26 test HP-LaserJet-1020: prnt/hpijs/hpcups.cpp 388: ERROR: unable to set device = HP LaserJet 1018, err = 48
Jul 8 10:32:26 test HP-LaserJet-1020: prnt/hpijs/hpcups.cpp 682: hpcups: returning status 1 from main
Any help would be appreciated.
vishal
July 8, 2010 at 10:34 am